|
| |
| |
| |
|
Mohave Valley
Raceway Classifieds / Want Ads
 |
|
If you would like to put your items up for sale or want
to send the word out that you need something, this is the place to do it!
Classifieds and want ads should be emailed to
RaceMVR@aol.com . Mohave Valley Raceway is
not responsible for the business deals that come of these ads. The ads are
placed here as a courtesy to our racers and fans. Ads will
expire one month after they are submitted or when they are removed by the
person submitting them. |
|
|
|
Exp 10.03.10 |
Complete roller with seat,current
seat belts,radiator, headers, just done racing want it gone
$2000.00 Got parts to make it complete also Call (928) 727-2749
|
|
| Exp 10.01.10 |
| fuel cell for alcohol out of modified sort of
triangle shaped with AN fittings, seat aluminum, no cover, is for a
big guy, pull back bar complete with spring if interested cal
486-7267 |
|
| Exp 9.25.10 |
|
Camaro Street-Stock For Sale
First $1,500.00 Takes it all
ALMOST Race-Ready / Add front bumper / Re-Run the Valves, Time it
and GO PLAY!
1981 Z-28 Body - Fresh White Paint (As straight as a dirt car can
be)
Fresh Door Skins
Kirkey Aluminum Seat w/ Cover and Rt. side Head rest
G-Force Belts (Brand New) Never strapped in (Man. Date: April 2010)
Chevy 350 / Turbo 350 Transmission
.030 Over bore (I believe - I have never had this motor apart Last
Run 2009 season)
Aluminum Pulleys
Aluminum Radiator
Edlebrock EPS Performer Aluminum Intake - IMCA Legal
Stock Ignition
Steering Quickener
Upgraded Cam - Unknown Brand and Model
12-Bolt Rear-end (Impala)
(4) 8” x 15” Assorted Wheels w/ Hoosier G60’s Mounted
Spare Parts:
Turbo 350 Transmission
Flywheel
Drive Line and extra U-joint
Straight Sub-frame
Upper Control Arms (L/R) Needs ball joints
Lower Control Arms (L/R) Needs ball joints
Steering Linkage - Straight
Power Steering Box - Good
Starter - Used (Probably a good core)
Spinldles (L/R) Used - turn ‘em and burn ’em
Crank - Remanned, still in shrink wrap
(2) axles (L/R)
10-Bolt Rear-end / Damaged Housing / Good locker and Gears I am told
Heads (L/R) Set-up for Mod 0-deck 2.02/1.60 Vales - Double Springs
Aluminum Race Seat - No Cover
Holley 4160 - 4bbl / 750 cfm Carb (Vacuum Advance) In pieces (rebuildable)
(2) beadlocks
(20) Stock Bore Pistons (Junk) w/ 5.7 Rods (Good)
No Calipers / No Shocks
Please contact: Gary Gillian
928-444-7969 (Cell) or text me a contact number and I will call you
back
ggillian@msn.com / numbskull4x@yahoo.com
|
|
| Exp 9.25.10 |
Imca race car straight off the race track! It was
raced at mohave valley raceway for years. i bought it, added
lights,signals, mirrors and all the stuff to make it street legal. I
have a clean title and everything.I has turn signals,brake
lights,horn, windshield and wiper, mirrors, etc. i have driven it
around town for awhile and it gets looks!
All of the suspension is factory straight from racing so it could go
back on the track. With the factory race suspension comes the race
ride.. it is not a caddy!
Engine is a 327 bored over 10 with erson aluminum heads, 510 lift
cam, all new top end. just put over 1500 in the top end
alone.aluminum radiator. everything is polished. very clean. spool
ford 9. powerglide trans with high stall converter Very fun and
different! this is a steal at 3000! too many toys.. not enough time!
It is titled as a 2010 special construction coupe
 |
|
| Exp 9.23.10 |
|
2004
Big Dog Modified – Chassis # 82 – Can run 4/4 Z/Z 4/Z or any
combo you like for rear end suspension, Swedge tube front uppers,
metric frame, 5 on 5 wheels, on board fire suppression system, 32
gallon fuel cell, Falcon transmission,
406
Alcohol motor
Claimer type pop up aluminum cast racing pistons
Compression ratio 12:1
Heads; 350 fuely gm heads, ported and polished
Stainless steel swirl polished racing valves Intake 2.02 exhaust
1.60
Iskenderian dual valve springs, guide plates, screw in studs
Cam: Iskenderian .534 Intake lift .525
exhaust lift solid lifter cam
Stock
Cast 400 crank
Connecting rods stock 400 shot peened ARP bolts.
True Roller timing set
RPM air gap (made by Edelbrock)
Complete assembly has been balanced
Carburetor 750 CFM Holly
Performance work on Carburetor done by Competition Carburetion
Belt driven fuel pump (Ron’s Fuel pump)
MSD distributor
Weiand aluminum water pump
Turn
Key - $7,000
Contact Scott @ 775-397-0487 or 775-753-4323
|
|
| 9.16.10 |
|
Shaw Style rear 4 bar 4 bar with J bar.
Underwood built front end. Bilsten Shocks
Roller just need motor, tranny, gear.
New Shaw Style body Late Model Style Roof
Real Lightweight Wheels Sharp car!
4000.00 obo 951-237-5290
|
|
| 8.30.10 |
These trying times are killen the construction
business. I have not even raced the modified
in 2 years, so I might as well let someone enjoy my car. Yes
it is me guys #33.
I have had a blast on that race track. My racing days are not
over. Things will pick up. Looking
forward to racing again soon.
2005 Modified J car
Only 8 races on car
Small block 400 cu in Chevrolet
IMCA Modified
3 speed stick racing transmission
Any further questions on specific details please call Wayne Peterson
@
928.530.8617
|
 |
| Exp 8.30.10 |
Methanol
for sale
$185.00 a barrel
call Bill Meyer
760-412-0838
760-326-2332
Needles Auto Wrecking
5156 Route 66
Needles, CA. 92363
www.needlesautowrecking.com
760-326-2332
 |
|
|
|
|
|
